Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Tiny MAC (Raspberry Pi inside)
Tiny MAC (Raspberry Pi inside) – 3D printable model from Thingiverse Thingiverse

Tiny MAC (Raspberry Pi inside)

by 3D_Lover
137 Downloads
127 Likes
0 Makes
Go to Model
This is nothing new, just another Raspberry pi emulation classic mac.

Print support needed even I have drawn some of the support.

This case is tight fit, it need your patient to cut the square holes and drill the earphone jack hole to fit for the pi.

I print it with 0.1mm layer, it takes 16 hrs to finish the case;less than 2 hrs to finish the bottom.

1 x M2.6 screw to mount the pi.
4 x M3 screw to mount the bottom to the case.
1 x 2.8" spi TFT LCD panel
1 x raspberry pi model 2 B with the SD card.
Source
Thingiverse
What you need to print this: Intermediate Medium confidence
Why?
supports needed · 0.10mm layers
Single piece Supports required Hardware needed
Supports 2/3
Assembly 0/3
Settings 2/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Layer height
0.1 mm
Est. print time
16 h
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Tiny MAC (Raspberry Pi inside) need supports when printing?
Yes, Tiny MAC (Raspberry Pi inside) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print Tiny MAC (Raspberry Pi inside)?
According to the design notes, Tiny MAC (Raspberry Pi inside) takes approximately 16 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Tiny MAC (Raspberry Pi inside) available in?
Tiny MAC (Raspberry Pi inside) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Tiny MAC (Raspberry Pi inside) free to download?
Yes, Tiny MAC (Raspberry Pi inside) is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection