Thingiverse
USB wrapper
von tomdraganov
1
Downloads
5
Likes
0
Makes
A simple USB wrapper to roll the cable nice and tidy.
Dimensions : 120 x 15 x 15 mm
The pincers are durable and make inserting and removing the cable nice and fast. It is very handy for on-the field work.
There are no moving parts, so it does not tend to break easily.
No specific settings needed.
For ABS extruder temperature is 230 degrees and 70 degrees bed temperature.
Layer height : 0.2 mm
Wall thickness : 1.2 mm
Top/Bottom thickness : 1.2 mm
Infill density : 20 %
Infill pattern : Grid
Print speed : 45 mm/s
Support : n/a
Build adhesion type : Brim
Brim width : 5.0 mm
Dimensions : 120 x 15 x 15 mm
The pincers are durable and make inserting and removing the cable nice and fast. It is very handy for on-the field work.
There are no moving parts, so it does not tend to break easily.
No specific settings needed.
For ABS extruder temperature is 230 degrees and 70 degrees bed temperature.
Layer height : 0.2 mm
Wall thickness : 1.2 mm
Top/Bottom thickness : 1.2 mm
Infill density : 20 %
Infill pattern : Grid
Print speed : 45 mm/s
Support : n/a
Build adhesion type : Brim
Brim width : 5.0 mm
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!