Thingiverse
USB wrapper
par tomdraganov
1
Téléchargements
5
Likes
0
Makes
A simple USB wrapper to roll the cable nice and tidy.
Dimensions : 120 x 15 x 15 mm
The pincers are durable and make inserting and removing the cable nice and fast. It is very handy for on-the field work.
There are no moving parts, so it does not tend to break easily.
No specific settings needed.
For ABS extruder temperature is 230 degrees and 70 degrees bed temperature.
Layer height : 0.2 mm
Wall thickness : 1.2 mm
Top/Bottom thickness : 1.2 mm
Infill density : 20 %
Infill pattern : Grid
Print speed : 45 mm/s
Support : n/a
Build adhesion type : Brim
Brim width : 5.0 mm
Dimensions : 120 x 15 x 15 mm
The pincers are durable and make inserting and removing the cable nice and fast. It is very handy for on-the field work.
There are no moving parts, so it does not tend to break easily.
No specific settings needed.
For ABS extruder temperature is 230 degrees and 70 degrees bed temperature.
Layer height : 0.2 mm
Wall thickness : 1.2 mm
Top/Bottom thickness : 1.2 mm
Infill density : 20 %
Infill pattern : Grid
Print speed : 45 mm/s
Support : n/a
Build adhesion type : Brim
Brim width : 5.0 mm
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !