Slicer Discord
A Fully Printable Microscope  – Modelo 3D imprimible de Thingiverse Thingiverse
A Fully Printable Microscope  – Bild 1 A Fully Printable Microscope  – Bild 2 A Fully Printable Microscope  – Bild 3 A Fully Printable Microscope  – Bild 4 A Fully Printable Microscope  – Bild 5 A Fully Printable Microscope  – Bild 6

A Fully Printable Microscope

por kwalus
3.1k Descargas
3k Likes
20 Makes
Ver Modelo
Well almost, you still need to locate 4 lenses from some disposable cameras and a light source.

For the light source use an LED or mirror, whatever you have. I used a cheap LED wall light from Wal-Mart.

For the lenses, I went to a local photography shop and they were very kind to give me an entire bag full (Thank you Lens and Shutter! http://www.lensandshutter.com/). Since I had so many, I designed it to work with them all. There is a different optical tube that you have to print for the Fujifilm lenses (11.9mm outer diameter) vs. the Kodak lenses (13.2mm outer diameter). It should work with the following as I measured them all and will likely work with others as well:

(CAUTION there is a significant shock hazard if you plan to open a flash camera from the capacitor!)

Fujifilm QuickSnap Outdoor
Fujifilm QuickSnap Flash
Fujifilm Flash

Kodak FunSaver Flash
Kodak unaned
Kodak Max Outdoor

I will try to keep an updated list of potential online so
Fuente
Thingiverse
Lo que necesitas para imprimir: Principiante Baja confianza
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

1 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección