Thingiverse
A Fully Printable Microscope
di kwalus
3.1k
Download
3k
Likes
20
Makes
Well almost, you still need to locate 4 lenses from some disposable cameras and a light source.
For the light source use an LED or mirror, whatever you have. I used a cheap LED wall light from Wal-Mart.
For the lenses, I went to a local photography shop and they were very kind to give me an entire bag full (Thank you Lens and Shutter! http://www.lensandshutter.com/). Since I had so many, I designed it to work with them all. There is a different optical tube that you have to print for the Fujifilm lenses (11.9mm outer diameter) vs. the Kodak lenses (13.2mm outer diameter). It should work with the following as I measured them all and will likely work with others as well:
(CAUTION there is a significant shock hazard if you plan to open a flash camera from the capacitor!)
Fujifilm QuickSnap Outdoor
Fujifilm QuickSnap Flash
Fujifilm Flash
Kodak FunSaver Flash
Kodak unaned
Kodak Max Outdoor
I will try to keep an updated list of potential online so
For the light source use an LED or mirror, whatever you have. I used a cheap LED wall light from Wal-Mart.
For the lenses, I went to a local photography shop and they were very kind to give me an entire bag full (Thank you Lens and Shutter! http://www.lensandshutter.com/). Since I had so many, I designed it to work with them all. There is a different optical tube that you have to print for the Fujifilm lenses (11.9mm outer diameter) vs. the Kodak lenses (13.2mm outer diameter). It should work with the following as I measured them all and will likely work with others as well:
(CAUTION there is a significant shock hazard if you plan to open a flash camera from the capacitor!)
Fujifilm QuickSnap Outdoor
Fujifilm QuickSnap Flash
Fujifilm Flash
Kodak FunSaver Flash
Kodak unaned
Kodak Max Outdoor
I will try to keep an updated list of potential online so
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
