Thingiverse
A Fully Printable Microscope
door kwalus
3.1k
Downloads
3k
Likes
20
Makes
Well almost, you still need to locate 4 lenses from some disposable cameras and a light source.
For the light source use an LED or mirror, whatever you have. I used a cheap LED wall light from Wal-Mart.
For the lenses, I went to a local photography shop and they were very kind to give me an entire bag full (Thank you Lens and Shutter! http://www.lensandshutter.com/). Since I had so many, I designed it to work with them all. There is a different optical tube that you have to print for the Fujifilm lenses (11.9mm outer diameter) vs. the Kodak lenses (13.2mm outer diameter). It should work with the following as I measured them all and will likely work with others as well:
(CAUTION there is a significant shock hazard if you plan to open a flash camera from the capacitor!)
Fujifilm QuickSnap Outdoor
Fujifilm QuickSnap Flash
Fujifilm Flash
Kodak FunSaver Flash
Kodak unaned
Kodak Max Outdoor
I will try to keep an updated list of potential online so
For the light source use an LED or mirror, whatever you have. I used a cheap LED wall light from Wal-Mart.
For the lenses, I went to a local photography shop and they were very kind to give me an entire bag full (Thank you Lens and Shutter! http://www.lensandshutter.com/). Since I had so many, I designed it to work with them all. There is a different optical tube that you have to print for the Fujifilm lenses (11.9mm outer diameter) vs. the Kodak lenses (13.2mm outer diameter). It should work with the following as I measured them all and will likely work with others as well:
(CAUTION there is a significant shock hazard if you plan to open a flash camera from the capacitor!)
Fujifilm QuickSnap Outdoor
Fujifilm QuickSnap Flash
Fujifilm Flash
Kodak FunSaver Flash
Kodak unaned
Kodak Max Outdoor
I will try to keep an updated list of potential online so
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
