Thingiverse
Engineering
Zum Modell
Power Bench
0
Downloads
0
Likes
0
Makes
A box for the Variable Power Suply by Greatt Scott Lab (https://www.instructables.com/Build-your-own-Variable-Lab-Bench-Power-Supply/)
I used a connected the 12V power suply to the 12V output and used a 7805 for the 5V outuput.
I used a 500kohm and a 10kohm resistor for the coarse and fine adjustment of voltage.
Everything else is exactly as greatt Scott tutorial
I used the foot spacer to position all the feet at the same distance from the edges.
To print I used fuzzy skin with thickeness of 0.3 and density of 3.
I used a connected the 12V power suply to the 12V output and used a 7805 for the 5V outuput.
I used a 500kohm and a 10kohm resistor for the coarse and fine adjustment of voltage.
Everything else is exactly as greatt Scott tutorial
I used the foot spacer to position all the feet at the same distance from the edges.
To print I used fuzzy skin with thickeness of 0.3 and density of 3.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
