Thingiverse
Engineering
Voir le modèle
Power Bench
0
Téléchargements
0
Likes
0
Makes
A box for the Variable Power Suply by Greatt Scott Lab (https://www.instructables.com/Build-your-own-Variable-Lab-Bench-Power-Supply/)
I used a connected the 12V power suply to the 12V output and used a 7805 for the 5V outuput.
I used a 500kohm and a 10kohm resistor for the coarse and fine adjustment of voltage.
Everything else is exactly as greatt Scott tutorial
I used the foot spacer to position all the feet at the same distance from the edges.
To print I used fuzzy skin with thickeness of 0.3 and density of 3.
I used a connected the 12V power suply to the 12V output and used a 7805 for the 5V outuput.
I used a 500kohm and a 10kohm resistor for the coarse and fine adjustment of voltage.
Everything else is exactly as greatt Scott tutorial
I used the foot spacer to position all the feet at the same distance from the edges.
To print I used fuzzy skin with thickeness of 0.3 and density of 3.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
