Thingiverse
Engineering
Ver Modelo
Power Bench
0
Descargas
0
Likes
0
Makes
A box for the Variable Power Suply by Greatt Scott Lab (https://www.instructables.com/Build-your-own-Variable-Lab-Bench-Power-Supply/)
I used a connected the 12V power suply to the 12V output and used a 7805 for the 5V outuput.
I used a 500kohm and a 10kohm resistor for the coarse and fine adjustment of voltage.
Everything else is exactly as greatt Scott tutorial
I used the foot spacer to position all the feet at the same distance from the edges.
To print I used fuzzy skin with thickeness of 0.3 and density of 3.
I used a connected the 12V power suply to the 12V output and used a 7805 for the 5V outuput.
I used a 500kohm and a 10kohm resistor for the coarse and fine adjustment of voltage.
Everything else is exactly as greatt Scott tutorial
I used the foot spacer to position all the feet at the same distance from the edges.
To print I used fuzzy skin with thickeness of 0.3 and density of 3.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
