Thingiverse
Joystick controller test bracket
por t0b1
31
Descargas
30
Likes
0
Makes
Simple test bracket for two KY-023 joystick modules. More fun than I thought. :)
I used “Hilbert Curve” as the top and bottom infill pattern.
OpenSCAD file is included.
You will need 2 × 4 = 8 M3x10 screws and nuts.
I also recommend to use washers.
I used “Hilbert Curve” as the top and bottom infill pattern.
OpenSCAD file is included.
You will need 2 × 4 = 8 M3x10 screws and nuts.
I also recommend to use washers.
t0b1 también publica en
85 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
