Thingiverse
Joystick controller test bracket
par t0b1
31
Téléchargements
30
Likes
0
Makes
Simple test bracket for two KY-023 joystick modules. More fun than I thought. :)
I used “Hilbert Curve” as the top and bottom infill pattern.
OpenSCAD file is included.
You will need 2 × 4 = 8 M3x10 screws and nuts.
I also recommend to use washers.
I used “Hilbert Curve” as the top and bottom infill pattern.
OpenSCAD file is included.
You will need 2 × 4 = 8 M3x10 screws and nuts.
I also recommend to use washers.
t0b1 publie également sur
85 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
